Quevuelvanloslentos Auto Centre

A new car product basically has a wheel that brought from automotive manufacturers. However, today changing a car wheel with various design trends is often performed. In addition to making the car look more stylish, the replacement of this wheel can increase driving performance.

When we replacement our wheels without look some direction, usually it can make our wheels easily damaged. Indeed there are guidelines that need to be understood for otomania who want to look stylish by changing their wheels without sacrificing comfort, safety, and durability of components. Here are some tips that should be understood if we want to change the car wheel. The same size tire theoretically, a car designer has calculated the most ideal size of wheels. So, if want to change the wheels, try the overall diameter tire same as the standard tire sizes.

This replacement is known as plus sizing. However, if such a standard wheels size 15 inches, the replacement of wheels is still safe if increases only one (plus one) until two (plus-two) inches. The increases of wheels size must be accompanied by reduction in size of the tire height of 5 to 10 percent and increase the maximum tire width of 10 to 15 millimeters. This is to reach the rim sizes are not distant with standard tires. Take the example of a standard wheel diameter is 15 inches with a height tire width of 65 mm and 185 mm. If you want to change with 17-inch wheels, so select the tire height maximum width of 50 mm and 205 mm maximum.

If you want choose 19-inch wheels size (plus-four), it must choose thin tires. The risk of choose this size was reduced driving comfort and size of the speedometer will be disrupted. It is estimated that each car moves 30 km there will be a motion to surplus the size of 1 km. Select the right wheels size & type for your car, but mostly people just select wheels based on like type & size. The right wheels choice not only will increase our performance but also our safety driving stay away. The first recommendation is to choose materials wheels that are made of aluminum with use technology wrought (forged wheel).

These types are the best and most expensive. The second is pressure cast wheel technology and the last type is cast wheel. Out of this type our safety is not guaranteed. Because, in addition wheels easily bent and even broken, usually beyond the third wheels type is very much weighted to interfere with driving comfort. After that make sure the wheel hole sizes in accordance with the relevant car. Not only must equal the number of anchor bolt holes, also the distance between holes (PCD) have exactly same. Different number of holes and PCD can be tricked it by adding the adapter. However, this activity is not recommended because it will disturb the optimization wheel movement

Trackback URI | Comments RSS